"I purchased the Ergotech Triple Stand 100-D16-B03 and was extremely happy with the whole buying experience. Mike was very helpful and prompt on replies, and shipping, too! I received it the day after placing the order. The stand works great and only took about 45 minutes to set up.
I got what I believe to be the best deal on the internet and would definitely recommend buying from Ergo LCD."
Sal Lombardo
I purchased the ErgoTech Triple LCD Desk Stand (model 100-D16-B03) with telescoping wings and modifications to add a fourth monitor to the top. Ron was the most helpful, friendly and professional person I have ever dealt with when making a purchase. The stand itself was to have a 6 day lead time, when in fact it took less, and was here at my door at about 5 days after I ordered it...
Dell Shannon
"Purchased 3 ergotech triple stands I do have to say it was great customer service and the stands are beautiful!"
Mike Walton
"Great customer service fast shipping and great prices. Will shop again!"
Q: How much height will the RPA add to my installation?: A: The RPA top is only 1.75" (44 mm) high plus approximately 0.75" (19 mm) for the projector bracket.
Q: Do I need to order the SLB projector bracket separately?: A: No, the assembly ships complete when you order an RPA ceiling
mount. The SLB bracket is a separate part number and is used only for
Chief SMART-LIFTS™. The RPA part number includes both the universal top
and SLB bracket.
Q: How much assembly is required for the RPA?: A: None, just attach the SLB bracket to your projector. If you
choose to use All-Points™ you will need to replace indicated screws with
included hardware. No disassembly needed.
Q: How much weight does the mount hold?: A: Each
mount is custom designed to support the weight of the projector models
specified. However, your ceiling must hold at least 5 times the weight
of your installation.
Q: How does Chief’s All-Points™ Security System work?: A:The system locks the projector and mount with security hardware at
all key connection points: Roll, Pitch and Yaw adjustments;
bracket-to-projector; and mount-to-bracket.
Q: Do I have to order All-Points™ separately?: A: No, All-Points™ is included in all RPA packages at no additional cost and is optional to use.
Q: Do I need any additional accessories to install the RPA?: A: The RPA can be flush mounted to the ceiling without any
additional accessories for a low profile, simple installation. However,
often times you will need to lower the projector from a structural,
finished or suspended ceiling. For these common applications, you will
want to order the appropriate accessories.
Q: When do I need to use the LSB100?: A: Often times, ceiling structures will not allow the projector to
be mounted in exact alignment with the projection screen. The LSB100
Lateral Shift Accessory saves time and hassles in trying to solve this
common problem. Also use the LSB100 to easily accommodate different lens
placement when projectors are replaced in existing installations.
Q: If I use the RPA with a Suspended Ceiling Kit, do I need an extension column?: A: Yes. Any 1.5" NPT threaded extension column will work with Chief’s Suspended Ceiling Kits.
Q: How does the RPA design create natural convection ventilation?: A: Chief’s brackets are custom designed to allow for airflow that ventilates and helps cool projectors.
